Showing posts with label #GEOARM #ALARMSYSTEM. Show all posts
Showing posts with label #GEOARM #ALARMSYSTEM. Show all posts

Monday, January 19, 2015

(ADC-IS-200-LP) Alarm.com Image Sensor- GEOARM


The Image Sensor is a breakthrough product that combines a PIR (Passive Infrared) motion sensor, an integrated still camera, completely wireless communication, and Alarm.com Interactive Services. The Alarm.com Image Sensor offers an entirely new service that is designed to deliver better security through visual verification of alarms and increased engagement through on-demand property views.
The Image Sensor (model ADC-IS-200-LP) is compatible with Simon XTi panels (version 1.0 & up), Simon XT panels(version 1.3 & up), Concord 4.0 panels and requires an Alarm.com module (version 146 & up for XT, 151 & up for XTi, 177 & up for Concord CDMA, 173 & up for Concord HSPA) with an attached Image Sensor daughterboard.
Not only is the image sensor compatible with the wireless GE systems listed above but, it is also compatible with the 2gig go control panel. The only difference in installation is that the you will not need the daughterboard but, you will need to add the 900 mhz transceiver along with the image sensor itself and you will be ready to start capturing images!
  • ETL certified for UL 639 and ULC S306
  • 35 feet by 40 feet detection coverage area
  • Remotely configurable PIR sensitivity
  • Pet immunity, etc.
  • Easy installation
  • Simple panel enrollment
  • No broadband required; No router configuration
  • Tamper detection, walk test mode, supervision
  • Color images
  • Night vision
  • IR illumination
  • Black and white images
  • Wireless image transmission to panel
  • Wireless image transmission to Alarm.com via cellular networks

Friday, October 3, 2014

How to wire a Tg1 universal communicator


  • Push the two indentations on the bottom of the communicator with a tiny flat head screwdriver.
  •  Once communicator face plate is lifted off look on the bottom left of the communicator you should see 5 pins sticking up.
  •  Locate the blue bus that comes in the plastic rappers out of the box
  •   Looking at the front of the bus all the way to the right is your power “red” and to the immediate left of the power will be the area for the ground “black” to be wired.
  •   Run the wires through the back of the communicator and wire the power into its designated slot as well as the ground.
  •   Slide the bus onto the 5 pins again making sure the power is all the way to the right and the ground right next to it on the left.
  •  Run the phone cable through the back as well and make sure it slides into its designated area until it clicks
  •  Screw in the antenna and you all set!





Tuesday, September 9, 2014

Modern cellular alarm monitoring


It’s the 21st century and everything has evolved including wireless security systems and alarm monitoringservices. In the past older, outdated wireless security systems that used cellular communicators had some bad tendencies. They were infamous for picking up interference from other local security systems or electrical devices. This means the alarm systems could be triggered accidentally causing confusion and inconveniences for everyone. With the evolution of technology wireless security system and monitoring there are now no longer and interference issues with these types of alarm systems.
                This is excellent news for all the diyers out there! This makes everything so much easier when installing your wireless alarm system. You no longer have to worry about having a dedicated land line hooked directly into your alarm system. Not only is this more convenient for the install but, this also means that you no longer need to have a dedicated phone line just for you alarm system so you can save some money.
                Cellularalarm monitoring is becoming more and more popular these days not only for the reasons I listed above but, there are also a few more benefits of using cellular alarm monitoring services. Cellular alarm combined with a system from Geoarm Security you can add interactive services and have home automation. Interactive services are where you can arm and disarm your alarm system from you iPhone or ipad as long as your system is capable of supporting these features. Homeautomation is another feature which can be used in conjunction with your cellular monitored wireless security system. This feature is basically where you can open and close doors with the proper equipment; you can raise or lower the temp of your thermostat, and even open and close garage doors. 



Friday, August 29, 2014

Honeywell's LYNX L5200 system




The Honeywell L5200 is one of the latest wireless alarmsystems to hit the market. The 5200 system is a lovely addition to Honeywell’s LYNX series wireless panels. This system has added many key features that will change the consumers notions about what a quality alarm system will offer from now on. Not only with the sleeker new look but, also the way the system connects with the consumer.

The 5200 system offers some of the same features as the 5100 system. Both of these systems offer a 4.7 inch touchscreen display with the same resolution and amount of colors that are offered. The 5100 system also, offer’s the same amount of zone capabilities 64 total zones, 48 of them programmable while 16 of them are designated for key fob zones. These two systems also have similarities in the ability to use z wave devices in conjunction with home automation services offered by alarmnet.

The L5200 wireless alarm system offers abilities and features that previous systems did not. Most importantly the l5200 system sets itself apart with its flash upgradable abilities. Geoarm thinks this is a magnificent addition to the LYNX series panels. This will allow the consumers the availability to have all of the new updates that Honeywell releases without needing a cable, or a technician to download the update which can take 3-12 hours to complete and would not allow the user to use interactive services. Most would say that this feature would be hard to match with its convenience factor but, Honeywell has surprised us again with the 5200’s ability to view a camera from the 4.7 inch display!

Geoarm security has paved the way for other DIY “do-it-together” companies out there and not only do we believe in the DIY concept but, we truly have merged into what we call a DIT “Do-It-TOGETHER” company because we truly are here for our clients and we don’t want you to do it alone we want to help you every step of the way! With that being said Geoarm has created numerous kits for the L5200 wireless security system, and we have made it so easy for you to locate the communication path that will suit you and your family best. Once you have decided on which communication path works best our kits make it very simple for you to add additional compatable items to your kit. From everyone here at Geoarm Security we wish you a happy and safe Labor Day weekend!


Friday, August 1, 2014

How to Program User Codes for DSC PC1616





We just received a phone call at the GEOARM'S help desk, the client needed assistance changing his user code on his DSC PC 1616. For anyone else that may need assistance with this don't worry GEOARM is here to help.








Thursday, July 10, 2014

How to install and configure a Wifi device in a Honeywell L5200





Click here for more information




Programming Wireless 5853 GBD in Honeywell L5200





Click here for more information




How to program Wireless 5834 Keyfob in L5200 panel





Click here for more information




Programming a Wireless 5828 Keypad into an L5200 Security System





Click here for more information




Programming a Honeywell 5816 contact into a Honeywell L5200 Panel





Click here for more information




Programming a Honeywell 5811 Contact in L5200 System





Click here for more information




How to program a Honeywell Wireless 5808W3 Smoke in L5200 Panel





Click here for more information








How to program A Honeywell 5800PIR-RES in L5200





Click here for more information




How to Install Z-wave on Honeywell L5200 Panel





Click here for more information




Differences Between L5100 and L5200 Security Systems





click this link for more information!!!




Wednesday, July 9, 2014

Honeywell LYNX L7000 alarm system intriguing features




    The L7000 system supports up to 80 wireless zones ,  If you have a larger space which will require you to have more than 65 zones, than you would want to go with the L7000 system. An intriguing feature of the L7000 is the display has been stretched to a whopping 7 inch display that can support up to four cameras to be viewed on the actual display. For any questions or concerns please feel free to leave us a comment or reach us at GEOARM.COM