Sunday, November 13, 2016

Honeywell Lyric SiXPIR Wireless Motion Review


The Honeywell Lyric SiXPIR is an encrypted wireless motion sensor with mounting hardware and is intended for use with the Lyric Controller and systems that support's SiX™ series sensors. The Lyric SiXPIR can be programmed and enrolled into the Honeywell Lyric Controller in a very quickly. Once enrolled, the Lyric SiXPIR sensor cannot be used with another security system until it is removed from the current controller because of its Lyric Lock feature. Each SiXPIR has a unique MAC number located on the sticker on the unit.

The Lyric SiXPIR has a 300-foot transmission range which is around 100 feet more than the previous 5800PIR so now you can place your motion sensor in those far away extra bedrooms from the Lyric Controller. SiXPIR has moved to a 2.4ghz operating frequency which provides you with a 128 bit fully encrypted signal to prevent intruders from jamming the RF signals. The Lyric SiXPIR has expanded its detection with a 40 foot x 56-foot detection pattern which has been designed to protect every size room. The SiXPIR has front and back tamper protection, to prevent anyone from tampering with the enclosure. There are LED indicators on the motion sensor for visual sensor notifications. If you have Total Connect services activated, you can also receive text and email notification anytime this occurs. 


The Lyric Motion comes with a Panasonic CR12A Lithium battery that can last for 5 years with normal use. Once the Panasonic battery that comes with the SiXPIR has died you can replace it with One 3V lithium battery. Duracell DL123 and Duracell 123a, Panasonic CR123A, Honeywell 466. 

When installing a Honeywell SiXPIR motion sensor there are a few guidelines you should follow and look at if you are troubleshooting. The Lyric Motion sensor should be installed at a mounting height of 7'6" either wall or corner mounted and allow a clear line-of-sight to all areas protected. Do not directly face a Lyric SiXPIR towards a window as traffic, window shades, or animals outside can set the motion detector off a cause false alarms. Avoid mounting a SixPIR in close proximity to moving machinery, fluorescent lights, and heating/cooling sources. Lastly, the Lyric SiXPIR is for use with pets no greater than 80lbs. In applications with pets mount the SiXPIR sensor with the center at 7.5 feet and where pets can't come within 6 feet by climbing on furniture, stairs, or boxes. Before your permanently install a SiXPIR make sure that you run a Go/No Go test and determine if the pet immunity will work with your circumstance. 

If possible it is always recommended to have at least one Honeywell SiXPIR motion sensor but, if you can't use this there are other great options that will help solidify your home or business security system. Try to protect all of your door/windows by using one of the Honeywell SiXCT door/window contacts in the event an intruder opens an entry point and separates the magnet from the contact causing the Lyric Controller alarm to go off. Having door/window contacts is usually the most common method of security but, what if someone breaks into your location by breaking your glass door or window? If this is the case, we always recommend backing up your Lyric SiXCT contacts with a Honeywell SiXGB. The Lyric SiXGB works by detecting all UL listed glass break frequencies and sends the signal directly to the Lyric Controller as an alarm signal. A good combination of these devices will set your house apart from other homes especially when you have AlarmClub's 
Alarm Monitoring Service that comes with Signs & Stickers as a deterrent.